What are step welding nuts? What is the difference with hexagon nut?
Release time:
2023-04-20 11:18
Source:
A step welding nut is a step nut suitable for welding outside the nut. Generally, it is made of weldable materials and thicker for welding. Welding is equivalent to turning two separate parts into a whole, melting metals at high temperature and mixing them together again for cooling. In the middle, alloy will be added.
Welding, relatively large strength, and a wide range of use, thickness can be, but due to high temperature will lead to the deformation of the connected parts, and not removable, and some active metal can not be used in the usual method of welding, welding parameters to see the fusion size of the weld, according to the fusion size adjustment welding parameters, until the elimination of defects. Of course, the quality of welding is related to the treatment before welding, cleaning ash, oil stains and so on.
What is the difference with hexagon nut?
Hexagon nut is used with bolts and screws to connect and tighten the parts. Among them, hexagon nuts are widely used. They are used for machines, equipment or structures with rough surface and low precision requirements. Customized hexagon thick nuts are used for machines, equipment or structures with relatively smooth surface and high precision requirements. The thickness of hexagonal thick nut is thicker, and it is often used for the occasion of installation and disassembly. The thickness of hexagonal thin nuts is thin, which is used for the occasions where the surface space of the connected parts is limited. Nuts are mechanical parts that have internal threads and are used in conjunction with bolts to transmit motion or power.
Related news
First of all, we need to understand the principle and performance of expansion screws. Expansion screws generally refer to metal expansion screws, in fact, there are plastic expansion screws, but they are not commonly used, so we generally think that they are metal.
① When running 12000km each time for secondary maintenance, the engine oil sump should be assembled to check the use of the engine bearing bush. If it is found that the clearance of the individual bearing bush is too large, it should be replaced, and the connecting rod bolts should be replaced at the same time. In normal operation, if the engine is found to run unsmoothly and there is abnormal sound, it should also stop in time to check.
Fastener bolted connection, how to make the washer play a better value
Bolt as a common connection parts, commonly used in mechanical equipment, cars, trains and building structures, according to different requirements to choose the appropriate type of bolt.
What are the materials of U-bolt
The general production of U-bolt materials are :Q235 steel, 45# steel, 40 boron steel, 20 manganese titanium boron steel. More than 90% of them are Q235 steel as raw material production.
Service hotline：13731005599
Tel：13513109909
E-mail：ann@mzfastener.com
E-mail：William@mzfastener.com
Factory address: East Road 107, West Hebeipu Village, Linmingguan Town, Yongnian District, Handan City, Hebei Province
Share with